Compressor is cycling, coolant is full, fuse is good, relay is good, fan motor is good ( tested with a jumper form the battery ). Is there a sensor switch that controls the condenser fan that may be bad or am I looking at some high dollar computer control? :4-dontknow:
Thanks RamTech,
How do I verify power and ground IPM ? If the IPM is good I'm guessing the next to check is the condenser fan relay control. If so, where is it located?
The relay is ground controlled at terminal 86 which comes from the PCM. You should have power at terminals 30 and 85, at all times. 87 feeds power to the fan so it will only be hot with the relay closed.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
DODGE RAM FORUM
2.2M posts
201.9K members
Since 2008
We’re the ultimate Dodge RAM forum to talk about the RAM 1500, 2500 and 3500 including the Cummins powered models.