DODGE RAM FORUM banner
K

Reaction score
7

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    3 Posts
    ken99
    i have a 2010 ram 1500 like everyone else.Only 1 connector. i read your thread on how to hard wire the oem controller, but im not clear on where to tie in.I know what wires i need, i see where the wires are spliced together, 1 comes from fire wall to splice, then 1 wire goes up towards dash and the other goes towards speedometer. Now where do i splice in at? the wire from firewall, the wire that goes up to dash or wire that goes towards speedometer.
    Any help would be appreciated. This has been a big headache trying to fiqure this out.
    thanks Kevin
    fireks09@aol.com

    · Registered
    Joined
    ·
    3 Posts
    ken99
    i have a 2010 ram 1500 like everyone else.Only 1 connector. i read your thread on how to hard wire the oem controller, but im not clear on where to tie in.I know what wires i need, i see where the wires are spliced together, 1 comes from fire wall to splice, then 1 wire goes up towards dash and the other goes towards speedometer. Now where do i splice in at? the wire from firewall, the wire that goes up to dash or wire that goes towards speedometer.
    Any help would be appreciated. This has been a big headache trying to fiqure this out.
    thanks Kevin
    fireks09@aol.com

    · Registered
    Joined
    ·
    2 Posts
    Ken,

    Thank you very much for your post regarding the ITBC for the 1500. I installed one but have yet to get it working I only had one connector, I spliced in the other wires but still noting. One problem I have is that I have three pink wires with light green stripes, so not sure which is the correct one. Any thoughts?

    Adam Bolton
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top