DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

Go Back   DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum > Members List


Vendor Highlight! - Check these guys out for great deals on Parts and Accessories!
Addictive Desert Designs!
FGT Motorsport
Bayou Goat Mounts

BoostedSport is on a distinguished road

BoostedSport BoostedSport is offline

Dodge Ram Forum Senior Member

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. HemiLonestar
    04-18-2012 03:00 PM
    You will need: front spindles from an 04-05; calipers from an 04-06 (04 calipers are different than 05-06 but bolt in the same place); brake pads; rotors; front reg cab coil springs if you ant thehandling upgrde to go with the new alignment specs; Dana 60 from a quad cab (unless you ant to drop the ass, the quad cab SRT's mount spring on top of axle, the reg cab SRT's mount spring under axle like a car, as they are pre-lowered from the factory); custom driveshaft since the SRT axles actually have pinion yokes instead of flanges and are a different length. Once you do the fronts, you are tied to a 20" rim or bigger from then on.
  2. HemiLonestar
    04-17-2012 07:12 PM
    Alright, first thing is you will have convert to SRT spindles as regular 1500 spindles have a different spacing for the calipers to bolt to. The rear isn't as important if you don't want to change gears, get a custom driveshaft or have bigger brakes out back. Keep in mind with the bigger calipers up front and the stock size out back your braking bias will be off.
  3. HemiLonestar
    04-16-2012 06:50 AM
    First, are you 2wd?

About Me

  • About BoostedSport
    Sedalia Missouri, USA
    Enter your vehicle info here!
    2003 Ram Sport
    Trim Level
    2003-2008 345ci (5.7L) Hemi V8 345hp 375lb/ft


Total Posts
Visitor Messages
General Information
  • Last Activity: 05-15-2016 12:32 PM
  • Join Date: 09-07-2011
  • Referrals: 0


All times are GMT -4. The time now is 09:01 PM.

= Copyright a Network Site =Ad Management by RedTyger
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.