DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum (
-   Body & Interior (
-   -   Grill Removal (

SEJO 02-09-2012 08:10 PM

Grill Removal
Hey Fellas,

Does anyone have step by step instructions to remove the grill on the new Rams? I want to remove it and make a few mods and looking for a little guidance before I are always helpful if you have some kicking around.


Ram10tuff 02-09-2012 08:30 PM

Dont have any pics but... Just pulled mine to paint it. There is a plastic cowl held on with plastic push clips. Gingerly perswade these out (about 3/4" round and 1" long with small plastic teeth)I have so i used a body panel fork and remooved mine. After that is removed there are(4) 10?12?mm bolts that will be visable now that cowl is off. After removing them the grill is free..... There are 2 clips on the bottom that hold the bottom in place. If you slightly perswade grill up/outward is will pop right out.
Good luck!!!

APSTRAM 02-09-2012 08:42 PM

Don't forget to use some masking tape to protect your upper bumper cover.

SEJO 02-09-2012 09:11 PM

OK sounds simple enough....looks like I have a nice little weekend project!

moparornocar72 02-09-2012 11:19 PM

go here, look further down the page.

carlos curiel 02-14-2012 01:36 PM

grille removal
hi guy, Visit one of my threads (front grille info), and Kay9 posted a response to my post, there is a video on the removal of the grille. very informative, good luck , carlos

rambridge 02-18-2012 08:24 PM

this is a pic of my front grill that i replaced.

it was easy. for the installations. take the top fan shroud with the plastic clips.

there should be some bolts under it for the grill. should be 6. then stick your hand down and pull the grill off the clips at the bottom. you will need some force to do this.

FireWire 02-19-2012 09:31 AM

Where did you buy that grill? Look's great!
My Ram was the only one in the parking lot a year ago when I first got it.
Now there are 4. I need to do something to make mine stand out!

All times are GMT -4. The time now is 11:08 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © VerticalScope Inc. All rights reserved.