DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Dodge Ram Wheels And Tires (http://www.ramforumz.com/forumdisplay.php?f=129)
-   -   35x12.5x20 (http://www.ramforumz.com/showthread.php?t=108702)

Snowman11 03-28-2012 11:33 AM

35x12.5x20
 
Will these size tires fit on my truck with just a leveling kit or do I need spacers?

itshertruck 03-28-2012 05:08 PM

2" leveling kit or the Bilstein 5100 height adjustable shocks, from what I have read, and you should be in the green. If you are staying on the stock 20" rims, you will need 1/4" spacers, otherwise rubbing tire against upper control arm.

NWRQC 03-29-2012 04:46 AM

Quote:

Originally Posted by Snowman11 (Post 761848)
Will these size tires fit on my truck with just a leveling kit or do I need spacers?

Tires will clear with the right wheel specs. What wheels are you running?

InDeepWaterBlue 03-29-2012 07:34 AM

You'd need a spacer if you're running a 12.5" Wide tire or it will rub on the control arm, and at 35" tall you'll need a level lift as well.

tsfischer 03-29-2012 05:47 PM

What is the typical offset for an aftermarket wheel for the 4th Gen trucks? I like the look of them sticking out an inch or two beyond the fender.

ramrig46 03-29-2012 10:08 PM

Yup will need a spacer or a negative offset rim. Personal experience with a + 18mm offset and 295x60x20tire rubbed the upper control arm. Now gonna go with a smaller tire and keep rims. Now selling the tires. Sometimes things don't work...

gmkillr 03-29-2012 10:18 PM

The stock wheels are +19mm offset
I bought zero offset wheels which are 3/4" further out than stock.
With 35 x 12.50 x 20's on them they fit perfect and theres about a 1/2" gap on backside for clearance.

tsfischer 04-03-2012 10:39 AM

Quote:

Originally Posted by gmkillr (Post 763058)
The stock wheels are +19mm offset
I bought zero offset wheels which are 3/4" further out than stock.
With 35 x 12.50 x 20's on them they fit perfect and theres about a 1/2" gap on backside for clearance.

Excellent info! What lift did you go with to be able to run the 35s? You don't have any rubbing issues?? I was thinking about doing a 2.5" level kit, and from my understanding, that will fit a 35" tire, with no issues.

BLKSVT 04-03-2012 11:00 AM

I'm running 35's with bistein 5100's up front on stock rims with a 1/4 spacer....no rubbing


All times are GMT -4. The time now is 03:41 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger