DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Mopar Online Parts - Dodge Ram Accessories! (http://www.ramforumz.com/forumdisplay.php?f=133)
-   -   P/N for Uconnect, USB cable & Upper bin (http://www.ramforumz.com/showthread.php?t=109915)

mmcglynn264 04-10-2012 03:13 PM

P/N for Uconnect, USB cable & Upper bin
 
I have a 2011 1500 SLT. It has the 130 RES with Sirius but no Uconnect. If things go as planned I will be getting a good price on the 430N RHB head unit. I have the upper glovebox with light. I need the correct part numbers for the uconnect module, the upper bin with the hoe for the USB port and the actual USB cable that goes from the Uconnect module and mounts on the back of the upper bin. If I've been reading correctly, certain modules require certain interface cable to operate properly.

All the part number listings I found for the cable seem to be for the Ipod specific connection or one called universal interface cable which requires drilling a hole in the bin. I want it to look just as if it was factory installed.

Any help on this would be greatly appreciated.

xsdbs 04-10-2012 03:47 PM

You will need the MOPAR kit # 82212159. This is the Uconnect kit that comes with the mic, harness and main module. You will also want to get the USB/Ipod cable, PN 82212160. This part will have a grommet on it where you can drill a 1" hole in the glovebox and fit the grommet into the hole.
If you want it to look fully factory, then replace the bin (I don't have this PN) and you will actually need PN 68068280AA for the USB/Ipod cable. It has a different mounting housing on it and also has a lighting ring around it. It is also a longer cable that can reach the center console.




Quote:

Originally Posted by mmcglynn264 (Post 773306)
I have a 2011 1500 SLT. It has the 130 RES with Sirius but no Uconnect. If things go as planned I will be getting a good price on the 430N RHB head unit. I have the upper glovebox with light. I need the correct part numbers for the uconnect module, the upper bin with the hoe for the USB port and the actual USB cable that goes from the Uconnect module and mounts on the back of the upper bin. If I've been reading correctly, certain modules require certain interface cable to operate properly.

All the part number listings I found for the cable seem to be for the Ipod specific connection or one called universal interface cable which requires drilling a hole in the bin. I want it to look just as if it was factory installed.

Any help on this would be greatly appreciated.


xsdbs 04-10-2012 03:49 PM

You will need the MOPAR kit # 82212159. This is the Uconnect kit that comes with the mic, harness and main module. You will also want to get the USB/Ipod cable, PN 82212160. This part will have a grommet on it where you can drill a 1" hole in the glovebox and fit the grommet into the hole.
If you want it to look fully factory, then replace the bin (I don't have this PN) and you will actually need PN 68068280AA for the USB/Ipod cable. It has a different mounting housing on it and also has a lighting ring around it.




Quote:

Originally Posted by mmcglynn264 (Post 773306)
I have a 2011 1500 SLT. It has the 130 RES with Sirius but no Uconnect. If things go as planned I will be getting a good price on the 430N RHB head unit. I have the upper glovebox with light. I need the correct part numbers for the uconnect module, the upper bin with the hoe for the USB port and the actual USB cable that goes from the Uconnect module and mounts on the back of the upper bin. If I've been reading correctly, certain modules require certain interface cable to operate properly.

All the part number listings I found for the cable seem to be for the Ipod specific connection or one called universal interface cable which requires drilling a hole in the bin. I want it to look just as if it was factory installed.

Any help on this would be greatly appreciated.


mmcglynn264 04-10-2012 04:32 PM

Found this thread with pictures P/Ns: http://www.ramforumz.com/showthread....install&page=2 The only part number i cant find is for the USB. That thread about even includes the right color bin for my truck. However, jmr already had the uconnect and the usb cable. Is the part number you gave for the USB the same one shown in the picture on the above link? That's the one I need. BTW, I have the bench seat so there is no center console in my truck.

xsdbs 04-11-2012 08:15 PM

The cable that is pictured in his hand is the PN 68068280AA. It's the one you need for the factory look.



Quote:

Originally Posted by mmcglynn264 (Post 773337)
Found this thread with pictures P/Ns: http://www.ramforumz.com/showthread....install&page=2 The only part number i cant find is for the USB. That thread about even includes the right color bin for my truck. However, jmr already had the uconnect and the usb cable. Is the part number you gave for the USB the same one shown in the picture on the above link? That's the one I need. BTW, I have the bench seat so there is no center console in my truck.


mmcglynn264 04-11-2012 10:04 PM

Thanks for all the info xsdbs. Once I get the radio, I'm ordering these parts. One last question. The usb port on the Uconnect module itself, is it a mini USB or micro?

xsdbs 04-12-2012 11:38 AM

You're welcome. It's a mini USB male.

Quote:

Originally Posted by mmcglynn264 (Post 774510)
Thanks for all the info xsdbs. Once I get the radio, I'm ordering these parts. One last question. The usb port on the Uconnect module itself, is it a mini USB or micro?


mmcglynn264 04-12-2012 03:15 PM

Quote:

Originally Posted by xsdbs (Post 774983)
You're welcome. It's a mini USB male.

Thanks, I'm probably going to make my own mount instead of using the factory cable. Cheapest price I found was around $46. That seems nuts for a usb cable. Lighted or not. I'll research a good panel mount USB cable & place it in that upper glove box.

xsdbs 04-12-2012 04:05 PM

Yeah, I saw it for around $55 and the 82212160 is about $35. (non lighted)



Quote:

Originally Posted by mmcglynn264 (Post 775136)
Thanks, I'm probably going to make my own mount instead of using the factory cable. Cheapest price I found was around $46. That seems nuts for a usb cable. Lighted or not. I'll research a good panel mount USB cable & place it in that upper glove box.


mmcglynn264 04-13-2012 08:45 PM

Thanks again for all your help. I have a question though. The USB in the glovebox that is connected to the uconnect module allows you to plug in an ipod and then control it from the HU correct? I'm trying to decide which lockpick to get and if the USB does allow ipod control than the CCH550 lock pick with the ipod connect cable would just be redundant. Also, where woulfd you suggest I purchase the Uconnect module in order to ensure i get one that is not outdated? or does that not matter?


All times are GMT -4. The time now is 02:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger