DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Body & Interior (http://www.ramforumz.com/forumdisplay.php?f=200)
-   -   remove panel ? (http://www.ramforumz.com/showthread.php?t=114236)

525pete 06-04-2012 12:37 PM

remove panel ?
 
2012 ST -- how does the panel below the heat/AC remove ? I want to mount a CB radio, and want to remove the panel to drill/mount the bracket

thanks, pete

RC DuDe 06-04-2012 07:33 PM

Remove the rubber tray above the radio. It will expose 2 T20 torx screws. If your truck has the 110V outlet on the right hand side you'll have to remove the outer trim piece around the outlet exposing another T20 torx screw. Once you remove the screws you'll have to pry the bezel out between the dash. The bezel is held in with a lot of clips. I think a dozen or so. I made a plastic pry tool out of some bicycle tire levers by grinding the end down and making a smooth thin flat end. Just be careful as you pry between the dash and the bezel. I started in the top outer corners. Once you get that bezel off you'll understand the rest.

525pete 06-04-2012 09:07 PM

ah, I have to take off all that stuff to get that lower panel out ?

I had hoped there was a way to get it out without disturbing the upper stuff. oh well !!
thanks, pete :)

RC DuDe 06-04-2012 11:35 PM

Quote:

Originally Posted by 525pete (Post 814100)
ah, I have to take off all that stuff to get that lower panel out ?

Yes everything is secured behind those panels.


All times are GMT -4. The time now is 05:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger