DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram Performance Mods - Engine - 5.2 Liter V8 (http://www.ramforumz.com/forumdisplay.php?f=86)
-   -   nitrous questions having trouble finnding misc parts (http://www.ramforumz.com/showthread.php?t=116951)

bobbyhill 07-12-2012 06:07 PM

nitrous questions having trouble finnding misc parts
 
alright first off i have searched around here found a little bit of common sense information and seems like most were dreamers that never went threw with it i hav e a nx main line wet kit nos purge kit bottle heater and blanket im looking for a throttle body spacer with a nitrous bung and also wandering what would be the best cam size to run my motors a rather fresh crate with 20k miles i have my piston rod combo just need some info and advice thanks

CdnoilRAM 07-12-2012 10:07 PM

You are probably going to have to tap your own tb spacer because I don't think anyone makes a nitrous plate for the magnum engines, not that I've seen anyways. What size shot are you planning to run? I would stick with the stock cam, get a stage or two colder plugs, and run a 100-150hp shot. You don't want to advance your timing with a nitous kit, in fact, you may want to pull some timing if you can and run a bigger shot with some high-grade fuel. If you don't already have one, pick up a nitrous pressure gauge to mount in the cab so you can monitor the bottle pressure, you want to be between 850 and 1050 when running with the NX solenoids

And please, in the future; use punctuation, that was just painful to read.


All times are GMT -4. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger