DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LOWERING or STANDARD (http://www.ramforumz.com/forumdisplay.php?f=24)
-   -   Belltech (http://www.ramforumz.com/showthread.php?t=121558)

jfthaxton 09-14-2012 03:12 PM

Belltech
 
I recently ordered the 2/4 drop from belltech but I ordered the crew cab version for my single cab because the only options were crew and mega. After a little research I found out the spring rate is different in the kits. Will this make much of a difference? Also Ive seen some guys cutting the springs to get more of a drop. Is this very hard to do?

RAM EM 09-14-2012 08:08 PM

My educated guess is it won't lower it as much as advertised, and the ride will be a little more firm. You can't return it for the correct kit? Cutting coils is simple, just need a grinder w/ a cut-off wheel, but then the ride gets even stiffer as you remove coils. I would really try to get the correct kit before you start hacking...

2011redrt 09-15-2012 10:50 PM

I would return it for the correct kit. I think you will be all kinds of unhappy with the wrong kit cut to fit!!!


All times are GMT -4. The time now is 07:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger