DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Dodge Ram Wheels And Tires (http://www.ramforumz.com/forumdisplay.php?f=129)
-   -   Max offset without running fender flares? (http://www.ramforumz.com/showthread.php?t=123958)

Exxzaust 10-18-2012 02:16 AM

Max offset without running fender flares?
 
Just wondering what offset do I need without running fender flares? -6mm or will -14mm even work?

NWRQC 10-18-2012 02:33 AM

How wide is the wheel?
A -6 on a 10" wide wheel will stick out further than a -14 on an 8.5" wide wheel by 11mm (almost 1/2 an inch). Stock is -18mm x 9" wide so measure out how far you want the wheel to sit then calculate from there.

Exxzaust 10-23-2012 01:02 AM

So i cant find any that would stick out! Everyone I find is 9 inches or smaller with a smaller offset then -18 :(

NWRQC 10-23-2012 04:14 AM

By smaller offset do you mean a lower number like +12 or -6 or do you mean less offset such as +25 or +38?

Exxzaust 10-24-2012 12:25 AM

higher offset like +12 or -6, did you mean in the first reply +18?

NWRQC 10-24-2012 02:45 AM

A 9" wide wheel would work. If you went with an offset between +19 and about -6 you wont need fender flares. I ran a -12 on 20x9 without flares and the tires stuck out slightly, but I liked them that way.

And yes I did mean to put +18 (it's actually +19mm, my mistake) in my prior response.


All times are GMT -4. The time now is 12:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger