DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   3.7L PowerTech V6 Specific Topics (http://www.ramforumz.com/forumdisplay.php?f=182)
-   -   2003 Dodge Ram 3.7 Help! (http://www.ramforumz.com/showthread.php?t=125656)

Rowdy123 11-09-2012 12:19 AM

2003 Dodge Ram 3.7 Help!
 
Is there anyone out there that lives close to Kennesaw, GA that would like to share some knowledge on increasing my horsepower.

RamTech 11-09-2012 09:55 AM

Not much you can do with the 3.7 outside of adding a CAI, exhaust and a Tuner. I haven't seen any supercharger setups if there are any available.

HemiLonestar 11-11-2012 08:24 PM

Gears. This gives more mechanical advantage for that baby engine. Higher stall TC will also get you into the 3.7's power band (little higher up RPM wise). SCT 9550's are compatible with most earlier PCM's (not all). Email Hemifever tuning with the p/n to your PCM and he can verify if it will work. If it does you can get custom tuning for it. There used to be a blower kit available when the engine first came out, but it was discovered early on that the ring lands on the pistons were too high for boost and they were breaking. So the kit was discontinued. JBA has also discontinued the 3.7 headers. If you can get a spare set of stock cams, you can probably get them reground to custom specs if you are so inclined. Not a whole lot of support for the lil 3.7.


All times are GMT -4. The time now is 10:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger