DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Total Load Control - Dodge Ram Air Suspension (http://www.ramforumz.com/forumdisplay.php?f=231)
-   -   Work with a Lowering Kit? (http://www.ramforumz.com/showthread.php?t=126491)

teenRam 11-20-2012 09:12 PM

Work with a Lowering Kit?
 
Hey guys, I love the concept of your kit. I will be towing 2 sport bikes from NC to GA on a trailer. I would like to purchase your kit before hand. My question is, does your kit work on a 2009 Dodge Ram 1500 CC that has been lowered with a McGaughy's 2/4 lowering kit?

GhostR1der 11-21-2012 03:15 AM

If you still have far springs then it should work. I think I saw somewhere that a set was installed on a dropped truck.

teenRam 11-21-2012 06:53 AM

Quote:

Originally Posted by GhostR1der (Post 942962)
If you still have far springs then it should work. I think I saw somewhere that a set was installed on a dropped truck.

Far springs??? I have the springs that came in the McGaughy 2/4 kit, if that helps determine if this will work

GhostR1der 11-21-2012 12:23 PM

Ann dam phone. I don't know what that was supposed to say lol. I bet it would work.

TLC John 11-21-2012 01:04 PM

Lowered RAM
 
Based on what we've seen, there is 4" of space between the axle perch and the bottom of the cup where the jounce bumper is.

At present, there isn't enough room for the TLC kit.

We are looking to see if there is solution, but not available at this time.

GhostR1der 11-21-2012 01:20 PM

Well damn. I'm glad you didn't buy on my word. I'm like almost positive there is a system that will work.

teenRam 11-22-2012 12:12 AM

Quote:

Originally Posted by TLC John (Post 943188)
Based on what we've seen, there is 4" of space between the axle perch and the bottom of the cup where the jounce bumper is.

At present, there isn't enough room for the TLC kit.

We are looking to see if there is solution, but not available at this time.

Thanks for the heads up. :smiley_thumbs_up:


All times are GMT -4. The time now is 08:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger