DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Dodge Ram Vans (http://www.ramforumz.com/forumdisplay.php?f=220)
-   -   After overhaul is done (http://www.ramforumz.com/showthread.php?t=131477)

djdado7 01-21-2013 03:37 PM

After overhaul is done
 
Ok guys here is my problem now.Ram2500 done overhaul on my tranny but now tranny would not down shift,trying to contact him got me nowhere.. before i was able to drive van with problem upshifting from 3-rd gear to 4-th ..now cannot drive van at all cause keep shutting down all the time.and sound of differential sound like metal to metal been rubbing. He stated that maybe is fuel pump ,or low engine oil,or that something went wrong while overhaul is done..I did read online that if some of this symptoms happens it would cause someone change ECM unit.. don't know what to think any more.Got car but don't got car..... any ideas what could be wrong

ramvan2500 01-21-2013 03:53 PM

Quote:

Originally Posted by djdado7 (Post 990990)
Ok guys here is my problem now.Ram2500 done overhaul on my tranny but now tranny would not down shift,trying to contact him got me nowhere.. before i was able to drive van with problem upshifting from 3-rd gear to 4-th ..now cannot drive van at all cause keep shutting down all the time.and sound of differential sound like metal to metal been rubbing. He stated that maybe is fuel pump ,or low engine oil,or that something went wrong while overhaul is done..I did read online that if some of this symptoms happens it would cause someone change ECM unit.. don't know what to think any more.Got car but don't got car..... any ideas what could be wrong

There is nothing wrong with the transmission, I have never had a failure on ANY REBUILD! You brought the van to me and it hadn't any motor oil! I put oil in it for free. It should not have any issues downshifting! The only thing I can think of is that the front servo isn't releasing when downshifting on the 2-1, however if this was the case you wouldn't be able to upshift the 2-3 without binding. Remember it shakes on the downshift and most likely because the engine is trying to stall out, my guess is there is an issue with the torque converter and or the engine.


All times are GMT -4. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger