Heat Issues - 2002 Ram 1500
Hey guys, new to the forum so I apologize if this has previously been answered. I have heat, but not to the driver's side. I have looked at the Heater Treater videos, but still my question remains unanswered. Since I have heat to the defroster and vents, but not to the driver's side. What blend door am and looking at to fix or replace?
Thanks in advance.
I have used the Heater Treater method to replace the top door on my 02, but I bought the door at O'Reillys for $99. It controls the vent selection. The bottom door controls the left and right and the right door controls the fresh/recirculate selection So my guess would be the lower flap door. Which is the WORST door to get to and replace. I used a butane solder iron with a flat blade and it cut like butter and no mess. I did have to file down the edges from the slight bit of melted plastic.
That's my $.02 worth and you can keep the change.
Thanks for the heads up and diagnosis. So you hav to cut into the box to get it out?
|All times are GMT -4. The time now is 04:42 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger