DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Dodge Ram R/T (http://www.ramforumz.com/forumdisplay.php?f=111)
-   -   performace (http://www.ramforumz.com/showthread.php?t=133647)

Chris b 02-14-2013 05:43 PM

performace
 
I want more out of my R/T!!! How many of you are happy with your stock 2600 converter?

05ram 02-14-2013 06:57 PM

I've heard that even though it has a factory higher stall that an Edge or Circle-D is a night and day difference... BTW you have a really sharp R/T!!!!!!!!!!

Chris b 02-14-2013 07:30 PM

Quote:

Originally Posted by 05ram (Post 1012205)
I've heard that even though it has a factory higher stall that an Edge or Circle-D is a night and day difference... BTW you have a really sharp R/T!!!!!!!!!!

Thanks bro:smileup:

dodgert 02-15-2013 12:07 AM

ill change mine out when my warranty runs out

Chris b 02-15-2013 12:24 AM

Im thinking about going with a 3000 or a 3200 but I ant to keep it an everyday driver

dodgert 02-16-2013 12:18 PM

you know if you change it out youll void your warranty unless the dealer does it

Chris b 02-16-2013 06:13 PM

ya, guess im going to wait a few more miles.

dodgert 02-16-2013 06:39 PM

lol drive faster then the miles add up quicker hey you ever call about those tires

CdnoilRAM 02-16-2013 11:35 PM

3000 is about the limit for a daily driver, even then it can be a little high depending on the type of traffic you get into regularly. A higher stall on a DD will cause a lot more heat to be generated in the TC because it's not locked up and working at its peak efficiency. A high stall can also cause a decrease in your MPGs if you have it too high because you'll continually be spinning the TC's impeller faster than the turbine, wasting engine power to fluid losses and heat instead of spinning the turbine side.

Now, if you plan to do more track time or spend time at or above 3000 rpm, then I'd say go for it, otherwise it might be better to stay with the 2400 or go as high as 2800 for a DD.

If you care to do some reading, Banks has a great article on TCs.

http://www.bankspower.com/techarticl...que-Converters

Chris b 02-17-2013 12:11 AM

Quote:

Originally Posted by CdnoilRAM (Post 1014206)
3000 is about the limit for a daily driver, even then it can be a little high depending on the type of traffic you get into regularly. A higher stall on a DD will cause a lot more heat to be generated in the TC because it's not locked up and working at its peak efficiency. A high stall can also cause a decrease in your MPGs if you have it too high because you'll continually be spinning the TC's impeller faster than the turbine, wasting engine power to fluid losses and heat instead of spinning the turbine side.

Now, if you plan to do more track time or spend time at or above 3000 rpm, then I'd say go for it, otherwise it might be better to stay with the 2400 or go as high as 2800 for a DD.

If you care to do some reading, Banks has a great article on TCs.

http://www.bankspower.com/techarticl...que-Converters

Thanks for the read:thk:


All times are GMT -4. The time now is 10:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger