DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram Performance Mods - Engine - 5.9 Liter V8 (http://www.ramforumz.com/forumdisplay.php?f=85)
-   -   94 5.9L Connector Identification (http://www.ramforumz.com/showthread.php?t=136562)

Bubba1960 03-17-2013 09:10 PM

94 5.9L Connector Identification
 
3 Attachment(s)
My son cut this 2 prong connector out to put one of those 19.95 supposed get better fuel mileage boxes that doesn't work worth a crap. I have tried to identify this connector so I could buy a new one as I cannot figure out how to get those locking wire inserts out so I could put the 2 wires back in. I thought was a MAP sensor but wrong place then thought maybe an air temp sensor but this goes into the manifold on the passenger side of engine just behind the alternator. The engine is a 1994 5.9L V-8 with auto transmission. Here are some pictures if anyone know what this is and where I could find that wouldbe great. Better would be if anyone knows of a way to poke those two wire holders out of so I could re-insert the wires. I couldn't identify it out of the old Haynes manual I had either.

Let me know

Thanks

Russ

RamTech 03-18-2013 03:19 PM

IAT or Intake Air Temp sensor is what you've got. I would just get one from a salvage vehicle and splice it in.

Deereman39 03-19-2013 11:11 AM

weather tight plug
 
That is called a weather tight plug and there is a tool that slides down over the pin to release it from the plug.If you can find a peice of thin tubing that will slide over the pin it would release the pin.
Ed


All times are GMT -4. The time now is 11:35 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger