4wheel drive light flashing
Hello everyone, I'm having a issue with my 4wheel drive light flashing,I en-gauge the the 4wheel drive knob and the light just flashes front wheels do not en-gauge, I removed the front actuator and observed the following, turn the knob to 4 wheel drive and I hear the actuator on the transfer case drive to its full stroke then the front actuator drives only about a 1/4 inch. I moved the spline spacer over the axles by hand and still no power to the front wheels,I"m thinking that theres a signal that must be made to prove that the front actuator is at its full stroke before power is sent to the front differental, I leaning toward replacing the front actuator, I'm just not 100 percent sure of what the end switch on the front actuator does.
|All times are GMT -4. The time now is 11:51 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger