DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (
-   Body & Interior (
-   -   An idea Ihad (

buzzvoodoo 03-29-2013 10:27 AM

An idea Ihad
So I had a small clean rip in the drivers seat about the size of a quarter. I took some needle and thread and sowed it up and it is hardly noticeable now. I highly recommend doing this cuz it nips the problem in the butt before it gets any worse.

This gave me an idea though. Normally the drivers seats wears down a lot quicker then the passenger seat does. Is it possible to switch the passenger seat with the driver seat? This way they wear evenly. Curious if this is doable.

HemiLonestar 03-29-2013 11:37 AM

The holes for certain attachments, etc, won't line up.

AFMEDIC 04-03-2013 05:21 PM

I know on some cars the only way to do it is to take the sat apart (cover and foam off) and put it on the other frame. To do it right you'll need hog rings and hog ring pliers. It doesn't always work, you would have to take the fabric off of both and compare them. $5 worth of hog rings is definitely better than a few hinder for factory seat covers and new foam.

All times are GMT -4. The time now is 09:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger