DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   2011 Dodge Ram Forum (http://www.ramforumz.com/forumdisplay.php?f=117)
-   -   Radio / console question (http://www.ramforumz.com/showthread.php?t=138567)

gfather 04-06-2013 11:47 AM

Radio / console question
 
Trying to install an amp and need to connect to the back of radio for remote wire.

I removed the two top screws and pulled out the top but the bottom is stuck. I have the shifter/console. What else do I need to do to get this out?

Thanks in advance.

ONOutdoorsman 04-06-2013 01:51 PM

Pop the surround off from the 115V plug (tab on the bottom), there is another torx screw there and then remove the rubber tray at the front of the console as there are 2 phillips head screws there. Then give it a good yank, it is tight.

I am sure you have probably found the instruction by now.

GTyankee 04-06-2013 02:28 PM

http://www.youtube.com/watch?v=oGFBxU7vsP8

http://www.youtube.com/watch?v=e7nsYnUQmkA

gfather 04-06-2013 06:31 PM

Thanks guys I did in fact find those videos before and thank god I did. That chrome plate around the shifter was a ball buster.

The blue/white wire from deck is the remote wire for those wondering.

I fed the power cord through the parking break hole to the engine, seemed to be the easiest.

GTyankee 04-06-2013 06:40 PM

One of the other places to go through the firewall, is the Clutch Delete Plate
all of the cabs are made identically, like a Crew Cab 1500 is the same cab that goes onto the 2500 & 3500 Crew Cab & some of those have stick shifts


All times are GMT -4. The time now is 11:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger