DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LOWERING or STANDARD (http://www.ramforumz.com/forumdisplay.php?f=24)
-   -   Thoughts on my Lowering Idea (http://www.ramforumz.com/showthread.php?t=139130)

xtreme 04-11-2013 05:27 PM

Thoughts on my Lowering Idea
 
So I have been eyeballing the Mcgaughy's 2/4 drop for some time, but was thinking what if I run the 2" rear drop coil and the front 2" coil from the kit. So I called Mcgaughy's and they said that they will sell me just the 2" front coils with the rear 2" drop coils for $358.00. I'm looking for factory look but just a little lower!

Now correct me if I'm wrong but I shouldn't need the track bar relocator, sway bar end links and bump stops? Also gonna be running stock chrome clad 20" and factory tires for now. I also intend to install a front and rear Adco sway bars. Lets here some thoughts? Thanks in advance.

RAM EM 04-11-2013 05:38 PM

I'm not a fan of the raked look, but that's JMO. As far as your idea, it would work just fine, and no you wouldn't need anything else. Good news is if you change your mind about the rear, you can always trim a coil or two off to get what you want. I say go for it and good luck! :smileup:

xtreme 04-11-2013 06:39 PM

So I will have no issues with clearance of the factory 20' and stock tires?

RAM EM 04-11-2013 07:47 PM

You shouldn't. There have been many here that have done it.


All times are GMT -4. The time now is 01:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger