DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LEVELING (http://www.ramforumz.com/forumdisplay.php?f=261)
-   -   Do I have a level kit or not? (http://www.ramforumz.com/showthread.php?t=140855)

national 04-29-2013 05:57 PM

Do I have a level kit or not?
 
I have a 2004 dodge ram hemi 4x4 1500..It seems to have plenty fenderwell gap with stock 17s..seen a million post about fitting 35s..well mine looks like it could no problem..maybe somone have a measurement from ground to bottom of fender on stock truck? I have seen some sit lower in front & some sit same..different factory packages I guess?? My looks untouched but it was about 6 years old when i got it..How to tell if I have aftermarket keys?

Gantman 04-29-2013 06:03 PM

We could use some pics bud to really help you on this one. Preferably of your front suspension.
:worthless:

Ryanb 04-29-2013 06:15 PM

From the ground to the top of the fender on my truck with a 2.5" leveling kit, it's sitting 38" with the right offset i would be able to fit 35s in there.

national 05-01-2013 08:24 PM

OK..mine reads about 38 to fenders with factory wore out tires..trying to post a couple pics toohttp://web.mail.comcast.net/service/...d=97820&part=2http://web.mail.comcast.net/service/...d=97821&part=2

national 05-01-2013 11:05 PM

http://web.mail.comcast.net/service/...d=97820&part=2

http://web.mail.comcast.net/service/...d=97821&part=2

starquestbd22 05-06-2013 09:07 AM

Quote:

Originally Posted by Ryanb (Post 1084287)
From the ground to the top of the fender on my truck with a 2.5" leveling kit, it's sitting 38" with the right offset i would be able to fit 35s in there.

Good info but you are rocking a 4th gen and the OP is rocking a 3rd gen so these numbers aren't going to compare.

Quote:

Originally Posted by national (Post 1086491)
OK..mine reads about 38 to fenders with factory wore out tires..trying to post a couple pics toohttp://web.mail.comcast.net/service/...d=97820&part=2http://web.mail.comcast.net/service/...d=97821&part=2

Your truck doesn't have to have a "kit" or keys to have been lifted in the front. Someone could have raised it by tightening the stock torsion key bolts. This can be hard to detect. That being said, best I remember the stock height from ground to center of fender wheel on a 3rd gen 4x4 is about 37.5", maybe give or take 0.5". So if it has been lifted, it was very little.

If those were pics you tried to post, they aren't working.


All times are GMT -4. The time now is 12:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger