DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (
-   Dodge Ram Wheels And Tires (
-   -   will these work? (

j3andit 05-18-2013 01:43 AM

will these work?
2013 express qc 4x4. leveled with bills at 2.1, no rear coil spacer. wanting to run 33x12.50x20 toyo mt with 20" moto metal 951

will these just swap right out with the stock wheels and be ok?

or do i have to have a certain offset or spacers?

i know i would with 35" tires, just dont know with 33s


brandonjansen 05-18-2013 02:03 AM

It's the width of the tires that makes you need the proper offset/backspacing. On a 20x9 wheel you need at least a 0 offset (5" backspacing). A -12 offset will work too, just stick out a bit further (0.5").

Here's a link to my thread installing 35x12.5 Toyo MT's on 20x9 -12 offset wheels. Yours would stick out just as far (if you go with a -12 offset), they just won't be as tall.

j3andit 05-18-2013 02:15 AM

ok thanks, so if i get this set up with the 33s and get the rims with 0 offset it will work? no rubbing at all?

j3andit 05-18-2013 02:28 AM

also am curious in the xd rockstars 33x12.5x20 but see the lowest offset is +10
is there a way to make those work?

brandonjansen 05-18-2013 01:44 PM

The 0 offset would be ideal, but yes the +10 should work as well. That gives you a similar back spacing to stock wheels with 1/4" spacers which lots of guys run 35x12.5's on. You might have a small amount of rubbing on the sway bar at full lock, but that should be it.

All times are GMT -4. The time now is 04:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger