DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LEVELING (http://www.ramforumz.com/forumdisplay.php?f=261)
-   -   Searched and lost more hair..leveling question... (http://www.ramforumz.com/showthread.php?t=149172)

Yotaconvert 08-01-2013 11:46 PM

Searched and lost more hair..leveling question...
 
Looking to level out me 2013 2wd crew.

I would like to get it to a somewhat close stance to the first one posted here.

http://www.ramforumz.com/showthread.php?t=139401

I cannot find for the life of me part numbers to run for the 2013 2wd ram to figure out what it is I need.

I want to do it right and not go uber cheap. Suggestions are greatly appreciated.

Bear with me im a newb when it comes to this stuff.

gonefishin776 08-02-2013 12:03 AM

Well you are 2wd so you can't run the same kit as a guy with 4x4.

Daystar and Fat Bob's Garage are the only sources of coil spacers to level the 2wds that I know of. (Taken from another guy on another forum)

I don't think anyone makes steel spacers for 2wd yet. Only the polyurethane ones. Which I'm personally not a fan of but it's really your only choice unless you go with a CST 4" or 7" lift

012RAMbo 08-02-2013 02:51 AM

Readylift also makes this kit for a 2wd. 2.5" front and 1.5" rear. Check out the first truck in this thread... http://ramforumz.com/showthread.php?t=144261.

Yotaconvert 08-02-2013 04:13 AM

Thanks so much guys I really appreciate it!

012RAMbo 08-02-2013 06:31 AM

No problem man! There are a bunch great members on here that are very knowledgeable and helpful. Good luck modding, its addictive!

MangoTangoMofo 08-02-2013 12:21 PM

Quote:

Originally Posted by Yotaconvert (Post 1165591)
Looking to level out me 2013 2wd crew.

I would like to get it to a somewhat close stance to the first one posted here.

http://www.ramforumz.com/showthread.php?t=139401

I cannot find for the life of me part numbers to run for the 2013 2wd ram to figure out what it is I need.

I want to do it right and not go uber cheap. Suggestions are greatly appreciated.

Bear with me im a newb when it comes to this stuff.


It always makes you feel good when someone else posts a pic of your truck, so thank you!

With that being said the ready lift that 012RAMbo recommended will give you a VERY similar stance to my truck. Check out the 5th post by 1LOWBLKRAM on the link he sent you.

One big think to keep in mind when levelling your rig is that the biggest impact comes from the wheel and tire combo you decided to run. If you want to stuff 35 tires under there (like I and so many others have) you will need to run a wheel with a different offset then stock (somewhere between 0 and -12) in order to clear everything which pushes your tires out of the wheel well giving you the aggressive stance you're looking for. You also gain 1 inch of lift simply by going from the stock 33 tire to a 35 tire.

The reason I bring up the wheel/tire combo is this, if you run your stockers you wont get the same look or stance by simply running a levelling kit. Your truck will look lifted and definitely sit higher then stock but its the whole package lift, wheels and tires that tie everything together.

Hope this helps.


All times are GMT -4. The time now is 10:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger