DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Drag Racing Discussion (http://www.ramforumz.com/forumdisplay.php?f=135)
-   -   0-60 in 5.62 (http://www.ramforumz.com/showthread.php?t=149477)

AlmostSleezy 08-05-2013 06:19 PM

0-60 in 5.62
 
So I tested my trinity out last night. Best time in 0-60mph I got was 5.62!
How accurate is the tuner? Because I still havent gotten hemifever tune yet.. im a big CC 4x4 on 35s. I didnt think that was possible ha

BlackRamHemi 08-05-2013 06:34 PM

it's only "close" if your tire size is entered correctly and you had zero tire spin at launch

FWIW, a "True" 5.0 second 0-60mph is about a 1.8 second 60' on a track slip
...and yes I have both ;)

and that's a little RCSB 4x4 on 32's (street) 28" DR's track with a 3000 stall TC (NA)

With my new supercharger just installed yesterday, guessing I'll see 4's 0-60mph

ericlee9386 08-05-2013 07:24 PM

Quote:

Originally Posted by AlmostSleezy (Post 1168577)
So I tested my trinity out last night. Best time in 0-60mph I got was 5.62!
How accurate is the tuner? Because I still havent gotten hemifever tune yet.. im a big CC 4x4 on 35s. I didnt think that was possible ha

That is a very good time for a cc. My qc 2wd on 24's best time was 6.2 and thats with a stall and longtubes.

AlmostSleezy 08-05-2013 07:37 PM

It's calibrated for my 35s. No spin, just got the rpms up a little and let er rip. I did one after and got the rpms up to 1500 and spun the tires at launch, got like a 6.50. :/
I could be wrong on the rpm range, I was busy staring at the tuner haha

BlackRamHemi 08-06-2013 10:39 AM

I ran a quick 4.41 yesterday, cleared it before I could snap a pic,
second pass was a tad slower, but chirped into 2nd even in 4WD
(with my 305/50R20 Grapplers, 3.55 gears)



http://i1097.photobucket.com/albums/...ps45b45aa8.jpg


On my Drag Radials (4 of them in 4-Auto) my effective gear ratio drops to 4.30:1 and I drop 2.75" in ride height
and an extra 120lbs in weight at the track I should be good for high 3's

AlmostSleezy 08-06-2013 12:54 PM

Dang! That's before your RIPP install huh? Hot damn.
Sean finished a tune for me, when I get off work I'll install! Very excited!!

BlackRamHemi 08-06-2013 01:09 PM

No, that's with my Ripp, just installed it over the weekend



Not pushing her too hard yet, stock shift points (5600rpm)
New Trans not installed yet and I def need a larger fuel pump
just ordered an Aeromatic Steath 340 through my Dyno/CMR tuner

BlackRamHemi 08-06-2013 01:45 PM

Here's my best N/A numbers

http://i1097.photobucket.com/albums/...aHemi/0-60.jpg



1.874 was my best 60' (at 2500'+ DA) 8.814 1/8th mile @ 78mph

Works out to a 5.01 0-60 on this 1/8th mile to 0-60 calculator
http://www.wallaceracing.com/0-60_equation.php

http://i1097.photobucket.com/albums/...ctober/023.jpg


Tuner times are fun,
but you really gotta back it up with a track slip to be sure it's accurate. ;)

I'm guessing with Boost on DR's in track trim I'll see at least 8.0 in the 1/8th at 88mph = 0-60 in 3.72 seconds

AlmostSleezy 08-06-2013 04:51 PM

That's flatout just insane. Street legal regular driving truck being that quick. Im pretty much done performance wise for my truck. Next is some cosmetic. Like your carbon fiber dash, I want!

BlackRamHemi 08-08-2013 09:56 AM

Got this one this morning on the way to the office :D

http://i1097.photobucket.com/albums/...ps84338c96.jpg


All times are GMT -4. The time now is 10:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger