DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LEVELING (http://www.ramforumz.com/forumdisplay.php?f=261)
-   -   '13 Leveling Kit Questions (http://www.ramforumz.com/showthread.php?t=149579)

dbezzek524 08-06-2013 03:03 PM

'13 Leveling Kit Questions
 
I have a 2013 Dodge Ram 1500 4x4 and I just recently bought a leveling kit which comes with a 3.5 inch coil spring spacer for the front and a 2 inch rear coil spacer. So I was wondering is it a good idea to install or will it destroy the front end and if it does what will it affect and do I need an alignment after installing the lift? Thanks

gonefishin776 08-06-2013 03:37 PM

where on earth did you get a 3.5" spacer??? ebay?

I'd hesitate to install that, your CV angle would be pretty steep I'd imagine.

I'd keep the rear ones and get bilsteins for the front and set at 2.8" if you want to be that high up in the front.

SK-Ram 08-06-2013 03:44 PM

3.5" is extreme for a front end level, is it a level + body lift combo?

dbezzek524 08-07-2013 10:32 AM

No its just a leveling kit, the front is actually a strut spacer, is that worse or better at least?

brandonjansen 08-08-2013 10:32 PM

3.5" is way too much for the front end of a 4wd truck.... Snap a picture of your CV shaft and control arm angles and post it up. My guess is that they're way too steep.


All times are GMT -4. The time now is 10:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger