DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Electrical (http://www.ramforumz.com/forumdisplay.php?f=164)
-   -   motor swap computer question (http://www.ramforumz.com/showthread.php?t=149959)

scrubby 08-10-2013 12:02 AM

motor swap computer question
 
I have a 1993 Dodge ram w150 with the 3.9l v-6 with a automatic in it . I am in prosess of swaping in a 360 maguim 5.9l v8 with a grany low 4 speed behind it. I have had a hard time finding a pin out diagram on these computers to tell me what each pin does and where it is located. I have the Part Number: NEC XTP97832 Product Line: NAPA Reman. Computer in the truck now, I am trying to find one that will plug in with little modifications other than the 2 new injectors that need to be run from what I understand this is easly done by plug and play ? I have a 98 motor and computer I can swap in but am relictent to do so because I would have to sclice and dice the wiring.

crazzywolfie 08-10-2013 04:32 PM

https://lh5.googleusercontent.com/-k...7/Untitled.jpg

Gen1dak 08-10-2013 07:05 PM

Save yourself some headachjes and get a pre-'96 360 Magnum computer. Your V6 harness will plug in and all you'll need to do is run the two injector wires.

scrubby 08-10-2013 07:38 PM

That is my plan to use a pre 96 computer but do yall know witch one will work? I was looking at a computer from a 94 ram 360 the plug looks the same but is the pin outs the same ? Thank you crazzywolfie for the image, is this the v-6 or v-8 pin out thanks again.

crazzywolfie 08-10-2013 10:33 PM

that is for both v6 and v8 trucks.

scrubby 08-10-2013 10:41 PM

ok so what years is this fit? I have a 93 and I was thinking of using a 94 computer, Is the wireing the same? I know the midsize are the same harness v=8 to v-6 but the full size is the same ? Thanks again for your help.


All times are GMT -4. The time now is 07:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger