DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (
-   Electrical (
-   -   Power locks not working at all (

mps4219 08-13-2013 03:38 PM

Power locks not working at all
All I get is a click under the dash. there is no noise or vibration or anything at the actuators. The switch on both doors will make the noise under the dash and the keyless will make the click under the dash and turn the dome light on when hitting unlock and honk the horn when hitting lock. no broken wires no blown fuses, and everything else works fine.

2001 dodge 1500

RogerRamJet 08-13-2013 07:24 PM

Check for power at/to the actuator when you engage the lock/unlock button on either the doors or your key fob. Although it's unlikely, both actuators may be bad. Once you've established that power is going to the actuators, we can move on to something deeper.

mps4219 08-13-2013 08:56 PM

I did have another actuator that I plugged in and nothing happened. I don't have a test light or voltage meter right now. Now, the other actuator was from a truck that has not been running for a long time but I am rather certain that it was working when the truck was in service.

For now lets go with the scenario that there is no power to the actuators.

RogerRamJet 08-13-2013 09:05 PM

Then the next step is to check/replace the relay. It may be clicking, but all that means is that it's seeing voltage, not necessarily closing. Check/swap the relay for the door locks.

mps4219 08-14-2013 12:25 AM

The problem seems to be in the CTM. while banging on it out of frustration the locks started trying to work. I have never dealt with the CTM but I have heard some very discouraging things

RogerRamJet 08-14-2013 12:39 AM

:doh: That's gonna be a PITA to chase down.

All times are GMT -4. The time now is 12:42 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger