DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LOWERING or STANDARD (http://www.ramforumz.com/forumdisplay.php?f=24)
-   -   Is there? (http://www.ramforumz.com/showthread.php?t=150550)

Venomouslou 08-16-2013 12:21 PM

Is there?
 
I have a 2013 Ram 1500 Express 2wd RCSB and i want to lower it. Not just 2/4 or even 3/5.... I want a 4/6! To totally look like the modern street drag racing truck it is! Is there anything out there like this and if not will they make it?

HELP!

Gonzo1968 08-16-2013 06:45 PM

You are probably going to have to cut them yourself. I plan on hacking my McGaughy's 2/4 kit. Just don't heat on them.

Venomouslou 08-16-2013 11:39 PM

Is this option reliable? I only have my truck.......... No way to get another/car..... I rely on myself and only myself for stuff.

Venomouslou 08-18-2013 04:49 PM

How low is yours that looks good!!

BlackRamHemi 08-18-2013 05:37 PM

To go much lower than 4" in the rear you'll need to C notch the frame,
otherwise your frame will be riding right on the axle bumpstops
(= no suspension travel)

Venomouslou 08-18-2013 09:49 PM

Is this hard? My buddy is gonna help me do this hes been building cars and trucks for years and he helped me modify my old rumble bee... Do you have any pics of install? Your truck is exactly how i want myn to sit. I never tow i never haul anything so this is the drop i want....

Venomouslou 08-18-2013 10:08 PM

what kit do i get and will be best to cut/modify? Can i get a parts list?? Mamba your the guy to talk to about this im glad you chimed in here! I was doing research on other threads and your the man!

Venomouslou 08-18-2013 10:36 PM

im trying to pm you blackramhemi but idk why it wont let me ....

Venomouslou 08-18-2013 10:43 PM

ah. you switched off pms.

I was just asking if you could point me in the right direction of which kit to get and any install tips and spring modifying advice to get this done.

GregInAtl 08-18-2013 11:58 PM

Quote:

Originally Posted by BlackRamHemi (Post 1179374)
To go much lower than 4" in the rear you'll need to C notch the frame,
otherwise your frame will be riding right on the axle bumpstops
(= no suspension travel)

I cut my 4" drop bell techs and got to 5.5" rear w an inch before bump stops. I added bags in the coils for towing my boat. 25 lbs in each and it rides fine loaded....5 lbs each unloaded


All times are GMT -4. The time now is 08:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger