DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LOWERING or STANDARD (http://www.ramforumz.com/forumdisplay.php?f=24)
-   -   QA1 shocks (http://www.ramforumz.com/showthread.php?t=153638)

mcvick 09-22-2013 08:07 PM

QA1 shocks
 
Does anyone know the part number for the QA1 front shocks that fit a 4gen 2wd.

NeverEnuff 10-10-2013 03:31 AM

Quote:

Originally Posted by mcvick (Post 1205863)
Does anyone know the part number for the QA1 front shocks that fit a 4gen 2wd.

I had them on my lowered '11. I just measured the Beltech drop shocks that were on there and looked up the ones that were similar. Call customer service I bet they can tell you exactly the ones you need. Sorry but I dont remember the part numbers. You will be very happy with them.

mcvick 10-18-2013 03:24 PM

Thanks, I ended up coming across the part number right after I made this thread. The front shocks are the TS507 and the rear is TS801. When I ordered the front shocks the T-Bar was short and ended up ordering the 3.5" T-Bar. On the 3.5" I had to modify it to get the bolts to line up.

shawnu 10-20-2013 02:49 PM

what do you have on there now??

I think the rear setup on the belltech kit is wayyyy soft and think if these to stiffin it up.

mcvick 10-20-2013 07:40 PM

Right now I'm run the belltech sport shocks on the rear and the qa1 on the front. I do plan on ordering he qa1 for the rear in the next couple of weeks. The belltech shocks are stiffer than the stock shocks, but I don't think they are the right shocks for the truck. The whole belltech setup in my mind was poorly put together.

shawnu 10-20-2013 10:35 PM

Same here. I dont like the 1 inch of travel to the bstops, and i think the rear is softer??

ssxrnr 04-30-2014 12:46 PM

Quote:

Originally Posted by mcvick (Post 1225511)
Right now I'm run the belltech sport shocks on the rear and the qa1 on the front. I do plan on ordering he qa1 for the rear in the next couple of weeks. The belltech shocks are stiffer than the stock shocks, but I don't think they are the right shocks for the truck. The whole belltech setup in my mind was poorly put together.

How did you modify the front QA1s to fit up front?

audio ram 05-01-2014 11:37 PM

thanks for the part numbers, i have been looking for them

mcvick 05-02-2014 12:26 AM

When using the QA1 shocks up front, the T Bar does not allow the bolts to align correctly so opened up the ends to allow the bolts to align. If I get a chance to go to my shop tomorrow I will take a few pics.

JETsimple 05-03-2014 04:32 PM

What about the QA1 coil-overs? Anybody use those?


All times are GMT -4. The time now is 01:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger