DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Dodge Ram Wheels And Tires (http://www.ramforumz.com/forumdisplay.php?f=129)
-   -   Looking at buying some BORA wheel spacers. (http://www.ramforumz.com/showthread.php?t=155375)

burtonxrider21 10-10-2013 01:13 PM

Looking at buying some BORA wheel spacers.
 
I just picked up some Goodyear Duratrac 325/60/20 tires to run on my stock 20x9 rims on a 2012 sport and would like to know what size of wheel spacers I would need to bring them out flush with my Bushwacker fender flares. Has anyone else done this? I have been checking the forums out, but haven't found the answer I'm looking for yet... Any info would be greatly appreciated!

LowUFO 10-12-2013 09:59 PM

You can figure this out for yourself. Take a 4ft level and put it next to your fender flare vertically. Make sure it is vertical by looking at the bubble. Measure in from the edge of the level to the fattest part of the tire. Let's say that's 3" (hypothetically). Now your new tires are 2" wider than your stock tires. So you need to split that as 1" will be on the outside of the wheel and 1" inside. Now you need to fill another 2" so that's the size wheel adapter/spacer you need to buy.

burtonxrider21 10-24-2013 09:29 PM

Thanks for the info! I ended up ordering 1 3/4" BORA spacers. I'll post some pics once I get them installed!

LowUFO 10-24-2013 09:33 PM

No problem. Looking forward to pics.


All times are GMT -4. The time now is 06:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger