DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LIFTING - Dodge Ram 4x4, 2x4 (
-   -   Tires on stock wheels (

jorge1985 10-23-2013 01:56 PM

Tires on stock wheels
I was wondering what would be the biggest size tire you can out on the stock wheels without spacers or rubbing? Or maybe a good set up on the stock wheels?

brandonjansen 10-23-2013 02:06 PM

285 is typically the widest you can go on stock tires with no spacers or rubbing. Some guys have managed to go wider but it's uncommon.

As far as height goes, that depends if you're at stock height or leveled... At stock height I wouldn't go much bigger than a 33" but you can probably fit a 33.5". If you're leveled you can fit up to 35" tall but I'd recommend staying closer to 34" to avoid looking stuffed. That partially depends on the type of tire you're going with too though.

gonefishin776 10-23-2013 02:07 PM

typically 285 is as wide as you can go.

some guys have been able to fit larger. ive even seen guys squeeze full 35s on. it looks crammed. it also depends on much rubbing ur willing to put up with. A minor rub at full lock is easy to avoid.

also, my whole family is from St. Augustine. I'm a Ponce, i'm sure you've seen the name around.

good luck on your tire search!

jorge1985 10-24-2013 07:11 AM

My truck is stock with no level or anything. Thanks for the info very informative. I wanted to put some 35's on but I don't think I can deal with any rubbing plus I like the stock height and look but need some bigger tires so 33's. And I'm very familiar with the Ponce name not only because I live in St. Augustine but also that name is everywhere in Puerto Rico where I'm from

All times are GMT -4. The time now is 06:17 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger