DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram Performance Mods - Engine - 3.6 Liter Pentastar V6 (http://www.ramforumz.com/forumdisplay.php?f=252)
-   -   Exhausst Tip for the Pentastar V6? (http://www.ramforumz.com/showthread.php?t=156664)

rrgmrg 10-25-2013 05:05 AM

Exhausst Tip for the Pentastar V6?
 
Is there an ezhaust tip availabe that slips ove the stock pipe without adding any length?

brondondolon 10-25-2013 10:50 PM

you can get a universal tip that will slide over the factory exhaust pipe. when you put it on cut about about 3 inches off the factory exhaust pipe so it doesnt stick out of the tip.

gcscott 10-26-2013 07:55 AM

I put on a Cherry Bomb Stainless Steel Exhaust Tip. It is a clamp-on and it has a 45 angle cut. I can't remember the size but it cost around $20.

This my be it but check the size first. http://www.summitracing.com/parts/imm-577457/overview/

I got the 12" one. 18" is to long. I did not cut the factory pipe.

Greg

scusemez28 10-27-2013 11:15 AM

Eagle One Never Dull wadding polish after every wash on tail pipe,looks good.

getupkid 08-07-2014 01:36 PM

I like the dual exhaust look, I am looking into this right now. Otherwise, I would go with a chrome 3" max, I can't stand when it looks like a paint can is hanging out the side...

mlaugh 08-25-2014 01:27 AM

Quote:

Originally Posted by rrgmrg (Post 1229030)
Is there an ezhaust tip availabe that slips ove the stock pipe without adding any length?

Yes......I got one at O'reily auto parts. It was like 25.00. Looks good.


All times are GMT -4. The time now is 08:54 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger