DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum (
-   Suspension (
-   -   help, help, help, Spacers? (

ty-wa 10-31-2013 09:35 PM

help, help, help, Spacers?
I have a rough country leveling kit on my 2012 ram 1500, 2.5 in the front and 1.75 in the rear; I found a set of Terras with 7000 miles on them, 325 60 R20's for 550 with a set of hummer wheels with them (which I would scrap/sell) is this a good deal? and if so
WHAT SIZE Spacers do I need to run if I get them, 1/4? 1inch centric? Hopefully 1/4 will work.
Too many different answers online.
Help please. Thanks.

LowUFO 10-31-2013 10:33 PM

That might fit without the spacer. They're basically 35.4 x 12.8. You might get away with it since they're Terras not Trails. I would go for it. If they rub, it will be light and you can pick up spacers at that point.

ty-wa 10-31-2013 10:46 PM

Are shims (or 1/4 spacer safe though?) And thanks for the 2nd reply by the way! I really appreciate it. And do you think thats a good deal? Or should I pay 1600 for 35x12.5 new?

LowUFO 11-01-2013 06:33 PM

No problem. That's a sweet deal. I would do it for sure. So cheap. But let me amend my previous post (which I had already amended) back to what I first thought. Reading other threads, it seems ppl can run that size w aftermarket rims w a lower offset like -12 and have no rubbing. But on the stock rims, you will probably need a 1" adapter to clear. Spacers and adapters are safe to use when used properly. Especially adapters which use their own bolts to mount the wheel and your bolts to attach to the hub. Check out for the best quality adapters out there. Other than the cost of the adapters, the only other catch is that between the adapters and the tires, the outside wall of the tire will now be 2" further out than stock which means you can throw a lot of crap off the tires onto the bodywork if you drive on dirt roads. It will destroy your paint.

ty-wa 11-10-2013 08:20 PM

Did it..
Ended up finding a set of Mickey Thomp ATZ that I couldn't say no to...35x12.5R20. Looks amazing! Thanks again!

LowUFO 11-11-2013 07:37 PM

Am I blind? Where are the pics?

ty-wa 11-11-2013 11:35 PM bad.
2 Attachment(s)
Oh yeah! haha.. heres two of them.!

LowUFO 11-12-2013 08:58 PM

Oh yeah, that looks good. Rubbing at full lock?

ty-wa 11-13-2013 11:17 AM

About that..
At first, yes, but I got an alignment the next day, and believe it or not, they don't rub but a touch, which isn't noticeable except to the driver (me). So they don't really rub at all.

LowUFO 11-14-2013 02:03 AM

Just when you've got the wheels turned fully to one side or either side?

All times are GMT -4. The time now is 12:44 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
= Copyright a Network Site =Ad Management by RedTyger