DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Body & Interior (http://www.ramforumz.com/forumdisplay.php?f=176)
-   -   Fog Light Insert Removal???? (http://www.ramforumz.com/showthread.php?t=160334)

Railroad Ram 12-08-2013 06:21 AM

Fog Light Insert Removal????
 
I have a 97 Ram SLT without fog lights. I want to remove the gray fog light inserts without removing the bumper. So far the only way to remove them is to cut them out with a razor knife. Any help would be useful.

KingofDomain 12-08-2013 05:03 PM

I have also heard of using a Dremel Rotary Tool also works very well. With the right attachment it should be fairly easy, of course with a steady hand lol...... Good luck to ya.....

anchorclanker 01-12-2014 11:13 AM

I recently installed factory style fogs on my 95 Laramie SLT. Taking out those old inserts with the smaller opening and putting in the correct ones for the lights.

Unfortunately you have to cut them out or remove the bumper from the mounts to release them. They are held in by tabs along the edges that you cannot otherwise see and the mounts trap them between the round and elongated openings.


All times are GMT -4. The time now is 03:12 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger