DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Chassis - Drive Line - Suspension - Wheels and Tires - LIFTING - Dodge Ram 4x4, 2x4 (http://www.ramforumz.com/forumdisplay.php?f=14)
-   -   20" Wheel Backspacing (http://www.ramforumz.com/showthread.php?t=37283)

57Hemi08 12-09-2008 12:39 PM

20" Wheel Backspacing
 
Does anybody know exactly what the backspacing is on the stock 20" wheels?

CrazyCooter88 12-09-2008 05:23 PM

If you take a straight edge and lay across the back side of the wheel and measure from the back flage of the wheel to the straight edge and you will have your backspacing. But I want to say its around 5 inches of backspacing

57Hemi08 12-09-2008 07:58 PM

Yeah, I haven't had time to take the wheel off and measure it. Wanted to order some new wheels and tires, so just checking to see if anybody knew right off hand. Wanting to run 35x12.5x18 and so I think I am going to need about 1" less of backspacing than I have now. So if 5", I need a wheel with about 4" of backspacing.

CrazyCooter88 12-09-2008 09:38 PM

Yea i got 17x9s M/T classics on my truck and they are 4.5" cause they stock was 5.5" and I am running 33x12.50x17 Super Swamper SSR's and on the stock wheels the inside of the tire was tight on the upper control arm(about a 1/4 to a light 1/2" off).

57Hemi08 12-10-2008 09:33 PM

Same here. Can't even fit my finger between the tire and spindle.


All times are GMT -4. The time now is 04:58 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger