DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Suspension (http://www.ramforumz.com/forumdisplay.php?f=192)
-   -   Outer Tie Rod Removal? (http://www.ramforumz.com/showthread.php?t=39039)

djdram 05-13-2009 01:57 PM

Outer Tie Rod Removal?
 
I am having touble removing my outer tie rod from my 02 ram 1500. I can't get it out of the steering knuckle with my standard tie rod removal tools. Is there a special tool for this application? Any help would be appreciated. I also need to replace the hub assembly so any advice on that job would be appreciated.

Thanks.

djdram 05-13-2009 08:44 PM

Outer Tie rod end removal
 
Have trouble removing my outer tie rod from my 2002 4x4 1500. The removal tools I have don't fit this application. Is there a special remover I need to use? The threaded shaft on the tie rod is so long none of my removers are big enough to remove it from the steering knuckle.
Thanks

guttermonkey1 05-13-2009 10:22 PM

I have ofter unscrewed the nut just to the end of the threads then smack the nut with a 4 lb hammer, always leave the nut on to prevent the threaded area from mushrooming

djdram 05-14-2009 11:53 AM

Thanks for the input. Question, what type of nut are you using because the one that comes with the tie rod is not deep enough to cover the end of the threaded area which is hexed?

Thanks


All times are GMT -4. The time now is 07:20 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger