DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   2010 Dodge Ram Forum (http://www.ramforumz.com/forumdisplay.php?f=79)
-   -   Service 4wd light on new 2010 Sport (http://www.ramforumz.com/showthread.php?t=45580)

Quiet Lunatic 12-27-2009 09:13 PM

Service 4wd light on new 2010 Sport
 
Picked up a new 2010 Sport with the 5 position transfer case tried shifting into 4 Auto and the service 4wd light came on, pulled over shut it off, started up tried it again and it worked, and for several more times it worked. I let the truck sit over night same thing the next day, any ideas?

gregster 12-28-2009 12:19 AM

I'm far from a pro, but in my personal experience, most of these warning light issues are simply sensors acting up or malfunctioning.

In the "good old days" when trucks came without all these sensors you would only be aware of trouble if there actually WAS a problem. If you are hearing a funny noise or feeling something, then there might be a real issue. Otherwise, I bet its some kind of sensor being overly "helpful". I had a sensor issue with my 2010 sport. Mechanically, my truck was perfect, but the "check engine" light was on and required some kind of sensor replacement.

I know thats not a very technical explanation, but hey, Im not a very technical guy!

Uncle Buck 12-28-2009 07:12 AM

I agree with Greg .... more than likely a sensor issue. We engineers tend to apply them like cheese on pizza ... you can never have too many ! :eek:

RamTech 12-28-2009 07:32 AM

Could also be an actuator issue. Let the dealer fix it.

erm 12-28-2009 08:33 AM

What he ^^^^ said. Get Thee To The Dealer.

Toms Blue Ram 1500 12-28-2009 08:50 AM

Sounds like a trip to the dealership .

Cormacs 01-24-2010 01:34 PM

It's wierd, now that you said that. On friday I had a new 2009 ram with a Service 4WD light on. Ended up being the final drive control module. It had a trouble code for an internal fault. I replaced it under warranty.

Quiet Lunatic 01-24-2010 02:06 PM

Mine turned out to be the the drive train control module, it was replaced this past Tuesday and its worked every time hot or cold since, where as before it would never go in on the first attempt when it was cold but usually did when it was warmed up.

Cormacs 01-24-2010 08:08 PM

I wonder if this will be a common problem.

Gigantle 01-27-2010 02:11 PM

I have the same problem with my 2010 Laramie. I have an appt this Friday and will post the resolution. Hopefully it is just a sensor.


All times are GMT -4. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger