DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Suspension (http://www.ramforumz.com/forumdisplay.php?f=192)
-   -   I Get To Play "What's That Noise?" (http://www.ramforumz.com/showthread.php?t=49283)

erm 03-08-2010 10:49 PM

I Get To Play "What's That Noise?"
 
So I've been having a bit of a drivetrain vibration issue. I thought it was tires in the rear but after swapping the rear tires to the front still having the vibration, I was stumped.

Well, today on my way home I had the windows down and I heard this noise that seems to be tied to vehicle speed...slow down and it slows down, speed up and it speeds up. And, when stopping, I hear this "thrum, thrum, thrum". Hard to locate while inside the truck.

So, off to the dealer I go tomorrow to play, "What's That Noise" :LOL: with my service advisor, who's great to deal with by the way.

Wish me luck...because I have a LONG road trip to begin on the 18TH!!!!

wermbang 03-09-2010 12:33 AM

It's a great game to play, but I always get the wrong prize door at the end. Good luck with finding the problem

CdnoilRAM 03-09-2010 01:06 AM

good luck :smileup: my vote is a dry turn signal linear actuator.

MoDodgeGuy 03-09-2010 02:01 AM

If it changes with the speed yer goin, my guess would be wheel bearing or something in your breaks. Let us know what it turns out to be once you find the culprit~

rustyolred 03-09-2010 02:09 AM

Wheel bearing, brakes or u-joint. That is where I would start searching.

Rusty

erm 03-09-2010 07:56 AM

I'll let ya'all know what they find.

txhemi 03-09-2010 09:08 AM

<sarcasm>
That's one of my all time favorite games!
</sarcasm>
I'm playing that right now with my truck too. I can't tell if its my intake tube or a ball joint because I can't ride under the hood while I drive.

Earl Branham 03-09-2010 10:04 AM

Yeah, I feel your pain! I have a hellacious wind noise coming from both doors, in the upper door frame. Tried moving the frame, but no luck. Hope I don't have to take it to a body shop to fix it. But, I have nothing in the truck, so not too much of a worry. BTW, it is a '98 SLT Laramie.

Earl

erm 03-10-2010 10:19 PM

Two problems diagnosed...driveline carrier bearing and a dragging caliper, both of which could have contributed. All fixed!!!

Toms Blue Ram 1500 03-10-2010 10:24 PM

Noise and vibration gone now ?


All times are GMT -4. The time now is 09:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger