DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Body & Interior (http://www.ramforumz.com/forumdisplay.php?f=176)
-   -   Removing cup holder (http://www.ramforumz.com/showthread.php?t=49431)

Dieselkiss 03-12-2010 03:05 PM

Removing cup holder
 
Ok folks, anyone know how to remove the dash mounted cup holder from this S.O.B? I've undone all the screws but can't get it out. I don't have access to my haines manual right now - so what am I missing?

Help!!!!

Toms Blue Ram 1500 03-12-2010 11:01 PM

If your dash is the same as mine , I've had mine out several times . Don't recall it being an issue with removal or installation .

Dieselkiss 03-13-2010 09:56 AM

Quote:

Originally Posted by Toms Blue Ram 1500 (Post 172153)
If your dash is the same as mine , I've had mine out several times . Don't recall it being an issue with removal or installation .

It's ok Tom.....it had been a long three days of 14hr days puling stuff apart - I was tired, frustrated and apparently.....dumb as a bag of hammers lol

All I had to do was (instead of tugging wildly at the 'hold the cups part') pull the top part, where it rests on pins at the front of the dash, off of the little pins and VOILA.....it came straight out lol

Amazing what a difference a night's rest and fresh eyes make to the frustrating jobs!!!!

bones64 03-13-2010 10:35 AM

:LOL: Dude dont feel bad.................I/we have been there lots of times im sure.:LOL:

rustyolred 03-13-2010 03:26 PM

For sure.


Rusty

chris K 06-17-2013 01:26 PM

I hope you respond to this.
When you removed the cup holder from the pins you talk about, did you have to loosen the dash or remove it?
Or, did you just apply slight pressure outward to get the tabs off the pins while the dash remained in original position?

Warlock III 06-18-2013 03:55 PM

Are you asking about removing the whole thing? Take out the 2 phillipps screws and the whole thing should come out and you'll see the tabs for future reference.


All times are GMT -4. The time now is 04:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger