DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Electrical (http://www.ramforumz.com/forumdisplay.php?f=164)
-   -   power door locks (http://www.ramforumz.com/showthread.php?t=54044)

sjolley 05-24-2010 07:47 PM

power door locks
 
hi,
i have a 1985 d150 pick up. the locks say electric lock on the top of the pull knob. the passenger door can be locked and unlocked by hand, the driver door cannot be locked at all. the passenger door lock doesn't seem to be working "electrically" I am wondering the components involved and what may need replacing. I am seeing a relay available at the auto part stores.

pavementends 07-06-2010 10:17 PM

Sorry Brother i dont have your answer but i drive a 07 and have the same problem. It worked when new and slowly one by onequit working cept for the drivers door. Any answers out there for both of us?? THANKS!! Whoops just realized this is the forum for Gen1 Rams. Sorry i reposted correctly

jmorton84 10-19-2010 10:34 AM

When you say you cant lock it at all, you mean even pushing down on the pull knob? if so, it sounds like your door lock motor is seized up. you should be able to just remove the door panel and reach in and disconnect the rod that links the motor to the lock and be able to lock your door, it will just be manually. and if you happen to find somewhere to replace the lock motor for cheap, let me know. I was told it was a dealer item and they want like 140 for it here.

Thunder38843 03-21-2011 11:46 PM

Same problem here. Jmorton is correct... My passenger door will lock manually but it has the rod disconnected as J stated. The driver door will not lock at all and the rod is still connected (But, it won't be as soon as it gets day light) Hope this helps ya! I can live without power door locks.

RedRam10 03-22-2011 12:10 AM

It looks like you've gotten some good guidance here. Hope you drop by more often. I wish you a big hello and a warm Carolina welcome. I hope you enjoy the best RAM ForumZ.:Hey:

want to drive 06-02-2011 05:01 PM

I have the same problem on my pap's 1990 150. I believe the motor is good put the linkage is frozen. it twitches when you hit the switch but you can lock it by hand.


All times are GMT -4. The time now is 05:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger