DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram Performance Mods - Engine - 5.7 HEMI V8 (http://www.ramforumz.com/forumdisplay.php?f=83)
-   -   2 quick q's (http://www.ramforumz.com/showthread.php?t=56932)

moparmike07 07-08-2010 09:39 PM

2 quick q's
 
Ok first question is when you put a new pulley on like the ati superdamp is there a certain way i have to tighten it? how would it get tight? I was looking at it i thought it was like when you start the truck its auto tightens? i might be wrong. Next question is there is a thick mesh like cable under where the intake is what that heck is that ?

moparmike07 07-08-2010 09:40 PM

i try to get pics of that mesh part rod near the passenger side spark plugs

CdnoilRAM 07-08-2010 11:00 PM

I know there's a stainless tube covered in a fiberglass mesh on the passenger side that runs to the EGR valve, that what you're meaning?

moparmike07 07-08-2010 11:32 PM

1 Attachment(s)
this you can barley see it lost camera girlfriend going to kill em :doh:
but here a close on

CHVYKLR 07-09-2010 02:24 AM

Quote:

Originally Posted by moparmike07 (Post 256503)
this you can barley see it lost camera girlfriend going to kill em :doh:
but here a close on

Looks like maybe an exhaust manifold cover?

There aren't any instructions on ATI's website?

chefred112 07-09-2010 02:55 AM

if it's the crank pulley you have to bake it in 350 degrees for 15 minute and it should slide right on...

chefred112 07-09-2010 03:00 AM

like CD says, it's probably the egr tube (remember, you dint know where the egr was?) the tube runs from just below an near tb and over the coil packs to the egr valve..

moparmike07 07-09-2010 04:21 PM

ok ya i guess that what it is thanks


All times are GMT -4. The time now is 12:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger