DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Exhaust (http://www.ramforumz.com/forumdisplay.php?f=141)
-   -   Mufflex 18 installed, passengers tail pipe not lined up (http://www.ramforumz.com/showthread.php?t=59240)

Flaminchiten 08-14-2010 08:43 PM

Mufflex 18 installed, passengers tail pipe not lined up
 
Hi all, I installed the mufflex 18 and the passenger side tail pipe is not lined up with the cutout, anyone else have this problem? Can it be lined up by adjusting the pipe going into the muffler or is the hanger slightly off and not going to line up?

Not a big deal since I plan on going to bigger tips eventually but I would really like it to be centered in the cut out.

erm 08-14-2010 08:47 PM

The hanger is usually the culprit. Is the tailpipe welded to the muffler or clamped? If clamped, loosen one of the clamps and try rotating the tailpipe a bit. This may line it up.

The back hanger may also need to be bent a bit to move the pipe side to side.

Flaminchiten 08-14-2010 08:56 PM

It is clamped to the muffler, I think I am going to find someone to stand behind the truck while I am under it and see if it is moving at all, if not then I'll just go into the local muffler shop and have some bigger tips welded on and centered :)

erm 08-14-2010 09:42 PM

Cool. Good luck!


All times are GMT -4. The time now is 12:40 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger