DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Body & Interior (http://www.ramforumz.com/forumdisplay.php?f=176)
-   -   Dual Gauge A- Pillar (http://www.ramforumz.com/showthread.php?t=60049)

Sledneck 08-25-2010 05:50 PM

Dual Gauge A- Pillar
 
How hard is it to install one of these for remove the factory A- pillar cover?

RootBeer 08-25-2010 05:56 PM

Removing the factory cover should be pretty easy. Just a couple of screw covers to pop off and then take out the screws.

I'd think the hard part would be finding what you want and running the wires.

Sledneck 08-25-2010 06:00 PM

oh well i have both the gauges already wired to my dash i just though it would be cleaner if i put them in the pillar. Ive never taken a look at taking it out tho was just wondering. Thanks!

RootBeer 08-25-2010 06:02 PM

Didn't mean to discourage you. Pulling the pillar cover is usually a 5 minute job.

Sledneck 08-25-2010 06:17 PM

No worries! Thanks for the help! :rep:

hunTer06 09-04-2010 04:17 PM

The a pillar on our trucks is simple to remove. its held in with 3 clips.

The hardest part of installation is hooking up the guages, which you have already done.

TLars 09-09-2010 01:52 AM

Anyone have a gray driver's side A-pillar with working speaker they want to get rid of? Please respond to TLarrimore@cox.net

If anyone happens to have part number - that would be appreciated as well.

Tony

984wdram 11-24-2010 03:04 AM

just get in the truck and snatch on it at the top and ull hear the clip either come out of the slot or pop off. then grab and snatch a couple more times and its out.

yonsracing 12-07-2010 01:43 PM

Once you get it in share some pics of it.


All times are GMT -4. The time now is 08:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger