DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   2010 Dodge Ram Forum (http://www.ramforumz.com/forumdisplay.php?f=79)
-   -   Stump pulling power! 2010 ram 5.7 mod dyno (http://www.ramforumz.com/showthread.php?t=65281)

SPEEDFREAK 11-03-2010 01:24 PM

Stump pulling power! 2010 ram 5.7 mod dyno
 
1 Attachment(s)
2010 RAM 5.7 HEMI MOTOR- WITH CAI, 85mm THROTTLE BODY, AMERICAN RACING HEADERS, AND DULL 2 1/2" EXHAUST WITH H PIPE, AND A GOOD TUNER, YOU CAN BE PUTTING DOWN TO THE REAR WHEELS 356hp AND A TQ CURVE SO FLAT THAT THE POWER CONTINUES TO PULL AND PULL!

SO IF YOU WANT TO RACE OR PULL LARGE LOADS THESE UPGREADES ARE A MUST.
A LOT OF TIME AND MONEY WENT IN TO THE TUNING AND PARTS TO FIND THE RIGHT PARTS AND EXHAUST SIZE FOR THE BEST BANG FOR THE BUCK.

chithead 11-03-2010 01:25 PM

Very nice!!! Man that's awesome... you really make me jealous with these numbers!

RootBeer 11-03-2010 01:26 PM

Cool, congrats.

My ss got a ls 11-03-2010 02:37 PM

Wow that's is some good power to the rear wheels

ctbourg87 11-03-2010 04:22 PM

Im slowly but surely workin my way there! Thanks for the info

NewMexicoRam 11-03-2010 05:41 PM

My truck only has 412 miles so I'm going to wait a little on the mods. However, the wife and I just ordered a 25' camping trailer yesterday and I'll soon see how the stock engine pulls it. I don't care about speed , I want plenty of, "grunt".

SPEEDFREAK 11-04-2010 12:26 AM

ram rt hp and tq
 
i could have more tq by a more restrictive mufflers. i balanced it out for the speed. i could have even more hp but then i would start to lose the tq. Iam at the point to add a cam. i want a 20% underdrive pulley but nobody makes one i called asp and slp nothing. the slp pulley for the charger 5.7 the neck is not longing enough. could have gained 10 hp and tq.

msn 11-04-2010 05:35 PM

Nice mods!

old hot rod 11-05-2010 09:48 AM

i have a stock 5.7 looking to add bolt on mods, not going inside engine, what should i start with, was looking at a mopar CAI but sounds like a lot of money for 8-10 hp any sugestions thanks for any help

chithead 11-05-2010 10:04 AM

Have you checked out the Arrington regrind? VVT specific camshaft? The XC-Blue CC541 specifically. They also have a Billet version, but it's quite a bit more money.


All times are GMT -4. The time now is 05:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger