DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   MDS (http://www.ramforumz.com/forumdisplay.php?f=147)
-   -   Adding an MDS LED light when active? (http://www.ramforumz.com/showthread.php?t=65359)

hckrphil 11-04-2010 02:02 PM

Adding an MDS LED light when active?
 
For those of you that have the 5.7 Hemi with MDS and no light to let you know WHEN and IF it is actually working..........

I found the procedure online here!!!!!

Bighorn5.7 11-04-2010 02:40 PM

if you just watch your tach while driving for a while you will be able to tell when the mds pops on. I could tell a month after i got my 07 and then added exhaust and could hear it. when cruising you will see it jump up 2 or 300 rpm all the sudden and when you hit resistance see it drop back down. Otherwise my edge evolution has a monitor that tells you when it is in mds mode also. Dont know about the do it yourself job though???

RootBeer 11-04-2010 02:41 PM

I don't think its possible, but this will be an interesting thread to follow just to find out for certain.

hckrphil 11-04-2010 02:52 PM

I thought I saw it as a 'mod' someone did, but I coudldn't PM them because I don't have enough posts yet :) haha

RootBeer 11-04-2010 02:54 PM

Quote:

Originally Posted by hckrphil (Post 350421)
I thought I saw it as a 'mod' someone did, but I coudldn't PM them because I don't have enough posts yet :) haha

Find the post again and post the link here. :D

hckrphil 11-04-2010 03:10 PM

I'm on the hunt for it now :) I'll find it :)

RamTech 11-04-2010 03:16 PM

After looking at the wiring diagram, it seems to me that installing one wire from a 12V led to a MDS solenoid wire and the other wire to a ground would be all you have to do.

hckrphil 11-04-2010 03:26 PM

Well that almost seems TOO easy..... has anyone tried this yet? :smileup:

Quote:

Originally Posted by RamTech (Post 350442)
After looking at the wiring diagram, it seems to me that installing one wire from a 12V led to a MDS solenoid wire and the other wire to a ground would be all you have to do.


hckrphil 11-04-2010 03:32 PM

Sweet.. just found the procedure on another site..... I'll repost it here in a second.

hckrphil 11-04-2010 03:38 PM

1 Attachment(s)
Here we go boys & girls........

~Phil :SHOCKED:

Attachment 11288


All times are GMT -4. The time now is 09:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger