DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Custom Dodge Ram Exterior Modifications - Body Mods - Body Kits (http://www.ramforumz.com/forumdisplay.php?f=15)
-   -   Grille Insert Removal (http://www.ramforumz.com/showthread.php?t=65771)

JakeRam02 11-07-2010 05:17 PM

Grille Insert Removal
 
searched the site and couldn't find a thread with instructions on how to remove the grille inserts on an 02-05 Ram. i gave it a shot but i can't get it out without damaging the stupid plastic rivet things. any help is greatly appreciated.

platinuminjected 11-07-2010 07:31 PM

im not sure how it is on the older models but on my 09 i had to take the bolts out on top of the grill and then there were clips and i just pulled straight out

erm 11-07-2010 07:33 PM

The rivets have to be drilled out.

thomasspink 11-08-2010 01:59 AM

you dont have to 'drill' them out if you find something small enough that can go in the center hole, like a nail, is what i used you can pop them right off, just give it a little tap and BAM there off!!! i just used zip ties to replace them with!

erm 11-08-2010 09:37 AM

I will be using the small screws that go back into the holes there. I just will make sure I use the right sized drill bit.

thomasspink 11-08-2010 10:48 AM

just be carefull that you dont drill out too much stuff i have seen that


All times are GMT -4. The time now is 08:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger