DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum (
-   Dodge Ram Wheels And Tires (
-   -   35's on stock rims (

cj1 11-08-2010 07:10 PM

35's on stock rims
Ok, so ive been looking and can't find a straight answer. will a set of 35's(federal couragia m/t 35x12.5R20) fit on my stock rims and not have any rubbing issues on the upper control arm(i dont care if it rubs the plastic in the wheel wells)?
i am leveled.
if it doesnt fit, what size rim spacer would i need?

Thanks Guys!!:smileup:

bamasport 11-08-2010 07:53 PM

I have 35x12.50x20 on stock rims right now. 6" BDS lift though, not leveled. I dont have rubbing issues, the person who installed it said i wouldnt rub but i put a 1/4" spacer in just to be sure.

cj1 11-08-2010 08:51 PM

im only concerned cause i put my hand behind my stock tire and it barely fits between. So i dont want to order the tires and get skrewed over.

ScatPak07 11-08-2010 08:59 PM

Since you have only a leveling kit be prepared to cut the crap out of the bumper and wheel well.

cj1 11-08-2010 09:24 PM

is it really that close?

thomasspink 11-11-2010 08:44 AM

on my 04 that is leveled, i have the stock 17's with 35x12.5 Feirce MT's
they do not rub at all

erm 11-11-2010 09:41 AM

At the very least you will need a level kit. Also, rubbing inside will be a function of the tire section width you go with.

I have a 4" lift and 285/75RX18's with a +18 offset wheel. No rubbing. I could go to a 305 with that setup pretty easily and not worry about rubbing.

But if you are stock height with stock offset wheels, 265 or 275 section width tires will be the max for you and a 35" tall tire will rub at the bumper, possible the trailing edge of the wheelwell and definitely at the wheelwell liner unless you lift it some.

foxcrazy90 11-11-2010 06:21 PM

since your leveled i think 35's work,but i would look into using a 1/4" spacer to bring the wheel out!!!

thomasspink 11-12-2010 12:40 AM

1/4" spacer doesnt really do anything unless you are just barely rubbing, they are just very small... i wouldnt run them unless i needed to, or unless i just got wheel adapter

thomasspink 11-12-2010 12:40 AM

great avatar by the way

All times are GMT -4. The time now is 09:15 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © VerticalScope Inc. All rights reserved.