DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Heating & Cooling (http://www.ramforumz.com/forumdisplay.php?f=190)
-   -   heater blower (http://www.ramforumz.com/showthread.php?t=72170)

gohanmoka 01-22-2011 07:30 PM

heater blower
 
Hi guys im a new ram owner. i got a 2002 1500 st quad 4x4. now the person didnt tell me but there is no powert to the blower motor. i didnt know that bc the guy rigged it to a plug and it was pluged into the cig lighter and i though it was just a phone charger. what fuse would cause no power. he cut the green wire and connected to a cig lighter plug

Burkdadhemi 01-22-2011 07:53 PM

I know there has been an issue with a lot of Rams like this, there is a plug that works it's way out from how it connects to the motor. Don't know if this is what is going on with your or not but know a few people this was the case.

Toms Blue Ram 1500 01-22-2011 08:03 PM

Man I hate when someone has gotten in there and instead of fixing the problem , makes a mess . I'm not sure how to tell you about going about and fixing it , other than reassemble the truck back the way it was originally then go from there .

Toms Blue Ram 1500 01-22-2011 08:05 PM

I just noticed this is your first posting . Make sure you stop by the newbie section and introduce yourself .

gohanmoka 01-23-2011 09:41 PM

ok i will. I think i fig it out i the the ign switch is bad in it. trhat is what i been reading. i also need a good write up on changing ur heat core

loveday.ag 02-08-2011 10:05 PM

Man I am curious to know if the ignition switch fixed it? I am having the same problems with my blower. I changed the resistor with no luck. I wiggled the fuse and the motor came on and worked at all speeds yesterday, but when I drove it today no fan?

gohanmoka 02-09-2011 12:35 PM

yes the switch worked. it costed me 25$ and it worked

loveday.ag 02-09-2011 11:06 PM

Sounds good, I bought a switch today and hope to get it in tomorrow. I had to just keep jacking with the tilt to get it to work today.

gohanmoka 02-10-2011 01:22 AM

Quote:

Originally Posted by loveday.ag (Post 439020)
Sounds good, I bought a switch today and hope to get it in tomorrow. I had to just keep jacking with the tilt to get it to work today.


Did it work for you

GTyankee 02-10-2011 01:34 AM

you may want to look at the www.heatertreater.com website

they have 3 videos that do a good job for trouble shooting, even IF its not for your particular year, its close enough


All times are GMT -4. The time now is 02:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger