DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum

DODGE RAM FORUM - Ram Forums & Owners Club! - Ram Truck Forum (
-   2010 Dodge Ram Forum (
-   -   Removing factory exhaust (

MiStiC NiNja 02-09-2011 11:41 PM

Removing factory exhaust
Hi guys, looking to put a Magnaflow on the Ram. Do you have to cut the stock exhaust to remove?

I installed a similar magnaflow exhaust on my Jeep Grand Cherokee last year and it was a pain in the ass hacksawing the stock pipe to install the magnaflow.

Rather can creep under my truck, i figured it would be easier to ask someone thats already removed the factory exhaust.

Thanks in advance!

RansRAM 02-09-2011 11:47 PM

Well Mufflex have kits to replace the stock muffler and they are bolt on. I haven't done mine yet however its on top of my todo list. Others will chime in I'm sure.

mattdecoste11 02-09-2011 11:53 PM

No cutting, just bolts!

MiStiC NiNja 02-09-2011 11:56 PM

oh thank you jeebus!!! Thanks for responding Matt, appreciated.

916Timmy 02-10-2011 01:22 AM

If you do the mufflex, it "clamps" in. Cherry Bomb makes a similar kit, just different sound. OR you can have a shop cut out your stock muffler and weld in a new magnaflow muffler of your choice. Mufflex and Cherry bomb kit you could do yourself.
Here is my shop done Magnaflow

And here is mufflex kit

And Cherry Bomb

Let me know if you have any more questions!

sk8noregon 02-10-2011 01:58 AM

Mine is a 2008 and my exhaust should be here tomorrow. Looks like Matt got ya but I was gonna say my stock exhaust is all clamped on. Good luck !

MiStiC NiNja 02-10-2011 08:04 AM

Wow, thanks for the info Timmy, rep for ya. I placed an offer on a magnaflow catback system on ebay. If he doesn't accept my offer i'll just pick up the mufflex!! Waaaay cheaper, and stock pipes are find :)

latitud 02-10-2011 09:17 AM

Depends of the mileage and condition I would say. Mine was able to simply loosen the bolt on the muffler clamp and wiggle the pipe free...less than 3,000 miles on the truck.

916Timmy 02-10-2011 11:44 AM

Glad you found what you like! If they are hard to get off, just soak them in WD-40 for 5-10 minutes, should be easier after!

MiStiC NiNja 02-10-2011 08:28 PM

offer declined on ebay, mufflex ordered! Thanks again!

All times are GMT -4. The time now is 07:25 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © VerticalScope Inc. All rights reserved.