DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum

DODGE RAM FORUM - Ram Forums and Owners Club! - Dodge Truck Forum (http://www.ramforumz.com/index.php)
-   Nitrous Discussion (http://www.ramforumz.com/forumdisplay.php?f=136)
-   -   Wet Kit Jetting (http://www.ramforumz.com/showthread.php?t=75092)

Silver04Ram 02-22-2011 01:02 AM

Wet Kit Jetting
 
I have my 04 1500 QC 4x4. Its got a CAI and a Magnaflow muffler dumped. I am going to be installing my Nitrous Works kit i got off a friend. Here is my question. I plan on running a 75hp shot through it for now cause i just replaced my plugs not too long ago with the factory Champion copper plugs so i dont want to push it too much. My friend ran this kit on his 06 evo so i want to know what Nitrous/Fuel jets i would want to use to run a 75hit and if i can get away with it possibly a 100shot but nothing more. I am taking the truck to run it here in March just to see what it will do. Any input would be great.

Dustin

CHVYKLR 02-22-2011 07:54 AM

Nitrous Works should have a pdf that shows what size fuel jets to use with the various shot nitrous nozzles. I would check out there website or give them a call. Also, if you are going to run the 100 shot I'd think you would want 1 heat range colder plugs. If you just installed stock heat range plugs I'd stick with a 50-75hp shot.

Silver04Ram 02-24-2011 01:04 PM

I figured the 75hit would be safe. I was wrong on the kit its actually a NX kit. i will check their site to see if there is a jet sizing file.

PorkChop 02-24-2011 02:13 PM

let us know how it turns out! im sure there a few people here considering a small nitro shot

moparmike07 03-03-2011 12:18 AM

ya i need to try to get my nitrous ready

Silver04Ram 03-03-2011 12:21 AM

I will let everyone know. I will be wiring everything this weekend or next depending on work schedule. I am trying to get it done by March 20th. This little place called Wendover Nevada has a little drag strip that used to be an old airport, going to see what this little baby has in her

moparmike07 03-03-2011 01:15 AM

wanan put up pics to help me do mine also :) that be nice

Silver04Ram 04-12-2011 01:39 AM

4 Attachment(s)
Well its been a month or so lol!! I have been busy and my computer hasnt been nice to me. I got it almost all together and took some pictures. Just need to run the lines to switches and plug in main feed line. Sorry underneath the hood is dirty. have not had a chance to get in there and degrease and clean it up yet. weather has not permited such a thing.

chefred112 04-20-2011 01:33 AM

run ngk 4306's gapped no more then .040, I gap mine at .035..

05bee729 04-20-2011 11:13 PM

my plugs have idk about 6k miles on um(factory replacement champion) and i have almost 2 full bottles through it so far 100 shot n it deff runs good


All times are GMT -4. The time now is 11:14 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vB.Sponsors
= Copyright RamForumZ.com a Gigathreads.com Network Site =Ad Management by RedTyger